Economic Digital Ultrasonic Cleaner< _LASTTHREAD  _NEXTTHREAD >
_INDEXFORUM -> Reclutamiento -> Confirmación de Players
Junior Member

_REGISTERED: 17/12/18
_POSTEDON on 17/12/18 00:25  
Economic Digital Ultrasonic Cleaner
Stainless Steel Dental Ultrasonic Cleaner
Tank size (mm300*240*150 mm
Capacity (mm)10 L
Unit size&#65288;mm&#65289;380*290*280 mm
Timer:1-30 minutes
HeaterUp to 80°C;
Ultrasonic power:240W
Heating power200W
Working voltage110v/220V;50/60HZ

Fully insulated stainless steel tank construction;
Digital LED screen show temp and time, easy to use;
Adjustable built-in heat to improve the cleaning effectiveness;
Stainless steel lid help to reduce the noise;

How to Use an Ultrasonic Cleaner for Medical & Surgical Instruments?
Medical and surgical instruments in a variety of sizes and complexity can pose challenges when it comes to cleaning, disinfecting and sterilizing them after use. An ultrasonic cleaner is an ideal tool for the first step in this three step process to protect medical personnel and patients from possible infection due to pathogens that remain on the instruments after a procedure.

Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:
&#9679;Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
&#9679;Instruments with movable parts should be disassembled to facilitate cleaning
&#9679;Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
&#9679;Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
&#9679;Set the control panel per manufacturers’ instructions and start the cleaning process
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.

Service line, Electron line, Medical & Surgical instrument, Laboratory, Machine line, Horniness alloy line, Chemistry line.
Industry and mining enterprise, universities, collegesand institutes scientific research unit laboratory; Hospital; Electronic workshop assembly line; Clock and watch eyeglasses shop,jewelry; Jeweler's shop, Family. you will use ultrasonic cleaner for everywhere.
Clean Items: Electronic products, mechanical hardware fitting,eyeglasses, jewelry, clock and watch, money, fruit and so on. Jewellery, Shaver Heads, Toothbrushes, Waterproof Watches ,Glasses Motor Parts,Ink Cartridges,
Machine Nozzles ,Chiropody Instruments ,Laboratory parts
Coins ,Pen Heads ,Printer Heads ,Printed Circuit Boards Veterinary Instruments

Q: What are the advantages of Skymen ultrasonic cleaner over traditional cleaning methods?
1. Minimize the use of manual labor
2. Make cleaning and degreasing without the use of organic solvents
3. Clean hard to reach areas of products and remove all types of dirt
4. Shorten the processes such as extraction, dispersion, purification, chemical reactions
5. Eliminates costly mechanical and chemical cleaning of heat exchangers

Q: What frequency is better for my parts?
A: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel parts clean (remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.

Q: Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.

Q: What cleaning solution should I use?
A: A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.

Q: Is rinsing after cleaning cycles?
A: Rinsing is recommended to remove any chemical residue that could be harmful to the part. Details can be rinsed right in your ultrasonic cleaner or in a clean water bath or in a separate sink tap, distilled or deionized water.

Our products

Why choos us and what benefit can i get?
1. We are orginal manufacture of ultrasonic cleaner, we provide quality and durable product with competitive price, and 1 year warranty.
2. 24 hours best service
3. Secure packaging to make sure goods deliver your customer without any damage.
4. We make standard ultrasonic cleaner with stock, customer do not have to wait long production time.
5. We accept OEM service, printed logo are aceptable.Economic Digital Ultrasonic Cleaner